View FLC38XGC6V-06_1149877.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

To :
Specification of FUJITSU TFT-LCD module
FLC38XGC6V-06
Approval
Date By
This Product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter "High Safety Required Use"), including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system. If customer's product possibly falls under the category of High Safety Required Use, please consult with our sales representatives in charge before such use. In addition, Fujitsu shall not be liable against the Customer and/or any third party for any claims or damages arising in connection with the High Safety Required Use of the Product without permission.
Specification No. : Tech Bes LCD-00050 Issue Date Issued by : T. Naka Director LCD Design Dep. LCD Technology Div. LCD Group : Oct. 30, 2001
FUJITSU LIMITED
1
2
3
4
FLC38XGC6V-06
REVISION HISTORY
A A Revision 01A 02B Date Prepared Checked Approved T.Naka T.Naka Summary 1st issue
Change connection method to ACF, Color Filter, and position of Gasket. Apply to NA19020-C281. Add ACF to connection method, change Color Filter. Apply to NA19020C281 only.
Sep.26,2000 M.Miyahara M.Fukuhara Jul.06,2001 M.Miyahara M.Fukuhara T.Minemura
02B B
Oct.30,2001 M.Miyahara M.Fukuhara T.Minemura
T.Naka
B
C
C
D D
DOCUMENT CONTROL SECTION
E
DATE
05 20011030 04 20010706 02 20001117 EDIT DATE
Miyahara Fukuhara Minemura Miyahara Fukuhara Minemura Fukuhara Fukuhara CHECK APPR. CHECK Miyahara DESIG. Miyahara
Revised p1,31 Revised p2,8,27,29-32 Revised p22,24 Revised p3 DESCRIPTION APPR. Fukuhara
FLC38XGC6V-06
Tech Bes LCD-00050
CUST.

03 20010109 Miyahara
DESIG. 20000926

1
/
F
1
1
2
3
4
FLC38XGC6V-06
TABLE OF CONTENTS
A 1.APPLICATIONS ............................................................................................................ 3 2.PRODUCT NAME AND MODEL NUMBER 2-1.Product Name ........................................................................................................... 3 2-2.Model Name .............................................................................................................. 3 3.OVERVIEW.................................................................................................................... 3 4.CONFIGURATION........................................................................................................ 3 5.MECHANICAL SPECIFICATIONS............................................................................. 4 B 6.ABSOLUTE MAXIMUM RATINGS............................................................................. 5 7.RECOMMENDED OPERATING CONDITIONS ....................................................... 5 8.ELECTRICAL SPECIFICATIONS .............................................................................. 6 9.OPTICAL SPECIFICATIONS ...................................................................................... 8 10.INTERFACE SPECIFICATIONS 10-1.Signal descriptions ................................................................................................. 13 10-2.Color Data Assignment .......................................................................................... 14 10-3.Input Signal Timing ............................................................................................... 15 C 10-4.Correspondence between Data and Display Position .......................................... 17 10-5.Power Supply Sequence ......................................................................................... 17 11.BACKLIGHT SPECIFICATIONS 11-1.Pin Configuration for Backlight ............................................................................ 18 11-2.CCFL ....................................................................................................................... 18 11-3.Life........................................................................................................................... 18 11-4.Lamp Assembly Set (for Replacement) ................................................................. 18 12.APPEARANCE SPECIFICATIONS D 12-1.Zone ......................................................................................................................... 19 12-2.Bright Spot.............................................................................................................. 19 12-3.Test Condition......................................................................................................... 19 12-4.Standard ................................................................................................................. 19
DOCUMENT CONTROL SECTION
A
B
C
D
13.ENVIRONMENTAL SPECIFICATIONS .................................................................. 21 14.INDICATIONS............................................................................................................. 22 15.PACKAGING 15-1.Packaging Specifications ....................................................................................... 22 15-2.Packaging Method.................................................................................................. 22 16.WARRANTY................................................................................................................. 27 17.PRECAUTIONS .......................................................................................................... 27
18.PRECAUTIONS FOR USE......................................................................................... 30 19.MISCELLANEOUS..................................................................................................... 30
E
DATE
FLC38XGC6V-06
04 20010706 EDIT DATE DESIG. CHECK APPR. DESIG. CHECK Add 18.,19. DESCRIPTION APPR.
Tech Bes LCD-00050
CUST.

2
/
F
1
1
2
3
4
FLC38XGC6V-06 1. APPLICATIONS
A This specification is applied to the 15.0 in. XGA supported TFT-LCD module. A
2. PRODUCT NAME AND MODEL NUMBER
2-1. Product Name : 2-2. Model Name B
LCD Module FLC38XGC6V-06 B
:
3. OVERVIEW
This LCD module has a TFT active matrix type liquid crystal panel 1024x768 pixels, and diagonal size of 38cm (15.0-inch). This module supports 1024x768 XGA mode (Non-interlace). This LCD has a digital RGB interface and can display 262,144 colors. Timing control signal is "Data enable signal : ENAB" only. (Data enable mode) Even and odd data are transmitted at the same timing in the interface, so data lines are 36. (R, G, B each 6 bit x2) The signal level of this interface is +3.3V CMOS level or 5V TTL level. The power supply of this LCD module is +5v DC single. This module has the characteristics for applying TCO'99.
C
C
4. CONFIGURATION
This LCD module consists of a LCD panel, LCD driving circuit, control circuit, interface circuit and backlight unit. The LCD panel is active matrix TFT type and Fujitsu's unique MVA (Multi-domain Vertical D Alignment) liquid crystal technology is adopted in it. The LCD driving circuit is integrated in IC chips, which are bonded on plastic wiring film (hereinafter TAB driver-IC), and the output terminals of the IC chips are connected to the LCD panel. The control circuit and the interface circuit are mounted on three kinds of printed circuit board (hereinafter PCB) and the input of the TAB driver-ICs are connected to the PCBs.
DOCUMENT CONTROL SECTION
D
With such circuit construction, the image data received by the interface circuit is forwarded to the control circuit and the control circuit modulates the image data to LCD driving signals. The TAB driver ICs buffer the LCD driving signals and output driving voltages to the LCD panel. These LCD parts such as the LCD panel, the TAB-ICs and the PCBs are assembled together with the backlight module in a plastic case and a metal frame. Fig.4-1 shows a block diagram of this LCD module. E
DATE
FLC38XGC6V-06
02 20001117 EDIT DATE DESIG. CHECK APPR. DESIG. CHECK Correct 3.OVERVIEW DESCRIPTION APPR.
Tech Bes LCD-00050
CUST.

3
/
F
1
1
2
3
4
FLC38XGC6V-06
A
Vcc (+5V)
DC/DC Converter Data Driver
A
Interface Circuit
Gate Driver
B
ENAB RO-5 GO-5 BO-5 DCLK
Control Circuit
LCD Panel
B
(External) VDD Inverter
Backlight
Fig.4-1.Block Diagram C C
5. MECHANICAL SPECIFICATIONS
Table 5-1 shows the mechanical specifications of this LCD module. Table 5-1. Mechanical Specifications Item D Dimensions Specifications 347.3x263.5x15.8(TYP.) (Excluding I/F Connector and fixing parts) (1024x3) x768 304.1x228.1 (0.099x3) x0.297 1 :1 Unit mm -- mm mm -- g -- E Edge type backlight is used. (2.6 CCFLx4) Outward Appearance is shown at page 30 and 31. D Remark
Display Resolution
DOCUMENT CONTROL SECTION
Display Dot Area Dot Pitch Aspect Ratio Weight FG-SG
1,500 max Short circuit
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

4
/
F
1
1
2
3
4
FLC38XGC6V-06
A
6. ABSOLUTE MAXIMUM RATINGS
Table 6-1 shows the absolute maximum rating of this LCD module. Table 6-1. Absolute Maximum Ratings Item Supply Voltage Input Voltage Symbol VCC VIN Condition Ta=25C Ta=25C MIN. -0.3 -0.3 TYP. -- -- MAX. 6.0 Vcc+0.3 Unit V V
A
B
B
7. RECOMMENDED OPERATING CONDITIONS
Table 7-1 shows the recommended operating conditions of this LCD module. Table 7-1. Recommended Operating Conditions Item C Supply Voltage (Logic) Ripple Voltage VCC Symbol VCC VRP MIN. 4.75 -- TYP. 5.0 -- MAX. 5.25 100 Unit V mV C
D D
DOCUMENT CONTROL SECTION
E
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

5
/
F
1
1
2
3
4
FLC38XGC6V-06 8. ELECTRICAL SPECIFICATIONS
Table 8-1 shows the electrical specifications of this LCD module. A Table 8-1. Electrical Specifications Item Supply Current "H" Level Logic Input Voltage B "L" Level Logic Input Voltage Leak Current (Logic Input) Supply Rush Current Supply Rush Current Duration (1A excess) Contrast Regulation VR C CCFL Turn on Voltage Lighting Voltage Lighting Frequency *4 D Tube Current Symbol ICC VIH VIL IIL ISCC TSCC RVR =50kHz, Ta=25C =50kHz, Ta=0C =50kHz =7mA =580Vrms =50kHz V=580Vrms Condition
VCC=+5.00.25V Vss=0V DCLK=32.505MHz
A MAX. 800 VCC 0.9 +5 5.5 0.4 100 1500 Vrms 1500 610 60 8 Vrms kHz A *4 Unit mA V V A A ms k C *2 Remark *1
MIN. -- 2.3 -5 -- -- 0 -- -- 550 40 6
TYP. 380 -- -- -- -- -- -- 1324 1324 580 50 7
B
(*1) Typical current value is measured when color bar pattern is displayed at Vcc=5.0V. Maximum current value is measured when 55/63 and 63/63 gray scale pattern every 2 pixel is displayed at Vcc=4.75V. Without rush current.
DOCUMENT CONTROL SECTION
BACK LIGHT
D
(*2) These items prescribe the rush current for starting internal DC/DC. Charging current to capacitors of Vcc is not prescribed. (*3) Backlight specifications are valid when using a suitable inverter such as the "FLCV-07" of Fujitsu Limited. (*4) Tube current (IL) shows the value of the current that is consumed at one lamp. This LCD module has 4 lamps. Each 2 lamps are placed at upper and lower side of the display. 2 lamps are connected in parallel. Each low voltage terminals are bound into 1 line cable, which connected to the backlight connector.
E
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

6
/
F
1
1
2
3
4
FLC38XGC6V-06
Note 1) Measurement Circuit A +5V Based on Fig.8-1. Icc Vcc GND
L
A
Logic
Analog
Driver
DC/DC Converte B
B
AC Vs GND I Fig.8-1. Measurement Circuit Note 2) Equivalent Circuit Based on Fig.8-2 (a), (b). VL Backlight
LCD module
C
Input signals DCLK
EMI Filter
CMOS logic signal (Internal)
C
ENAB RO0~5,RE0~5 GO0~5,GE0~5 BO0~5,BE0~5 D
EMI Filter ......... MEM2012TC100(TDK) Fig.8-2 (a) Equivalent Circuit of Logic Signal Input D
DOCUMENT CONTROL SECTION
Vcc
Fuse (2A)
EMI Filter
Internal Circuit 10F 10F 100pF E
GND FG Frame ground Fuse ..................KAB2402202NA (Matsuo Electric CO., LTD.) EMI Filter ........SGM20C1E332-2A(Sumitomo Metals)
Fig.8-2 (b) Equivalent Circuit of Power Supply
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

7
/
F
1
1
2
3
4
FLC38XGC6V-06
A
9. OPTICAL SPECIFICATIONS
Table 9-1 shows the optical specifications of this LCD module. Table 9-1. Optical Specifications Item Visual Angle Horizontal Vertical Symbol L,R U,D CR ton Condition CR10 U,D=0 L,R=0 L,R,U,D=0 L,R, U,D=0 L,R, U,D=0 Ta=25C Ta=0C Ta=25C Ta=0C Specifications MIN. 80 80 210 -- -- -- -- 200 80 0.283 0.299 TYP. -- -- 400 15 50 10 50 250 -- 0.313 0.329 MAX -- -- -- 30 100 25 100 -- -- 0.343 0.359 Unit deg deg -- ms ms ms ms cd/m2 White *1 % -- -- (1)(5) (1)(5) (7) (1) (5) Ta=25C Remark Note (1)(2) (3)(5) (6) White/ (1)(2) Black (3)(5) (1) (4) (5)
A
B
Contrast Ratio Response Time(ON) (B W) Response Time(OFF) (W B) Brightness Brightness Uniformity Chromaticity W R G B LCD Panel Type
B
toff I I X Y (x, y)
C
L,R,U,D=0 VCC=5V, IL=7mA (at maximum brightness) Red Green White
C
(0.646, 0.350) TYP. (0.310, 0.593) TYP. (0.153, 0.152) TYP. TFT Color Normally Black VA MVA -- 262,144 Black Anti-glare (Haze value:25%, 2H) (symmetry) (6-bit color) (6) D
D
Display Mode Wide Viewing Angle Technology Optimum Viewing Angle Display Color
DOCUMENT CONTROL SECTION
Color of non-display area Surface Treatment
(*1) Value at 15~20 minutes after lighting on. (Note) *CS-1000 (MINOLTA Co., Ltd.) , BM-5A(Topcon) or equivalent luminance colorimeter should be used for the measurement. Field=2, L=500mm *The specified value of viewing angle, contrast, brightness, brightness uniformity and chromaticity are under the dark room condition (1lux or less).
E
DATE
FLC38XGC6V-06
04 20010706 EDIT DATE DESIG. CHECK APPR. DESIG. CHECK Revised chromaticity of R, G, B DESCRIPTION APPR.
Tech Bes LCD-00050
CUST.

8
/
F
1
1
2
3
4
FLC38XGC6V-06
A
100 80
=2.20(TYP.)
A
Brightness Ratio [%]
60 40 20 0 0 8 16 24 32 40 48 56 64
Gray Scale Level
B
B
C
Fig.9-1. -Curve (Reference Value)
C
D D
DOCUMENT CONTROL SECTION
E
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

9
/
F
1
1
2
3
4
FLC38XGC6V-06
Note 1) Definition of Viewing Angle (1) A Based on Fig.9-2. L Top (12 o'clock Direction) LCD module Y+ U D *0 (Front) R X+ Right (3 o'clock Direction) A
B X- Left (9 o'clock Direction) Y- Bottom (6 o'clock Direction)
B
* U=0,D=0,L=0,R=0 Fig.9-2. Definition of Viewing Angle (1)
Note 2) Definition of Viewing Angle (2) C Based on Fig.9-3. MAX TYP MIN Display Surface L,R,U,D =0 Display Surface C
D Fig.9-3. Definition of Viewing Angle (2) Note 3) Definition of Contrast Ratio (CR) Determined by Formula (1) based on Fig.9-4.Voltage-Brightness Characteristics. = LW (Brightness at white) LB (Brightness at black) -------- (1) White D
DOCUMENT CONTROL SECTION
L Brightness L Black L 0 0
E Panel Drive Voltage [V]
Fig.9-4. Voltage-Brightness Characteristics
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

10
/
F
1
1
2
3
4
FLC38XGC6V-06
Note 4) Definition of Response Time Based on Fig.9-5. A ON Drive signal of LCD panel OFF Non-select status Select status Non-select status
A
100% B Relative Brightness 0% 90% White 10% Black ton ON Response Time toff OFF Response Time Black B
Fig.9-5. Definition of Response Time C Note 5) Contrast Ratio and Response Measurement System Based on Fig.9-6. Y+ X+ C
D
Z- X-
Z+ Brightness Meter or Luminance Colorimeter (with luminosity correction function) D
DOCUMENT CONTROL SECTION
Y-
Drive and Measurement System
E
Fig.9-6. Contrast Ratio and Response Time Measurement System
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

11
/
F
1
1
2
3
4
FLC38XGC6V-06
Note 6) Definition of Optimum Viewing Angle A Based on Fig.9-7. MAX A
Contrast Ratio
B
10 (-) 0 (+)
B
6 o'clock Viewing Angle 12 o'clock Fig.9-7. Definition of Viewing Angle
Note 7) Definition of Brightness Uniformity C Brightness uniformity is defined by the following formula. Brightness (I1~I9) art measured at the following 9 points ( 1 ~ 9 ) on the display area shown in Fig.9-8. |Min. In| Brightness Uniformity (L) = |Max. In| x 100 (%), n=1 to 9 C
153 D 1 2
DOCUMENT CONTROL SECTION
512
871
4 5 6
7 8 9
115 384 653
D
3
Note) Each measurement point ( 1 ~ 9 ) defines the center spot of Brightness Meter view. The tolerance of measurement position is 5mm. Fig.9-8. Measurement Points
E
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

12
/
F
1
1
2
3
4
FLC38XGC6V-06 10. INTERFACE SPECIFICATIONS
10-1. Signal descriptions A Table 10-1 shows the description and configuration of Interface signals (CN1). A Table 10-1. Interface signals (CN1) Pin Pin Function Function Symbol I/O Symbol I/O 1 GND -- Ground 31 GO1 Green odd data 1 2 RE0 Red even data 0 32 GO2 Green odd data 2 3 RE1 Red even data 1 33 GO3 Green odd data 3 4 RE2 Red even data 2 34 GO4 Green odd data 4 5 RE3 Red even data 3 35 GO5 Green odd data 5 6 RE4 Red even data 4 36 GND -- Ground B 7 RE5 Red even data 5 37 BO0 Blue odd data 0 8 GND -- Ground 38 BO1 Blue odd data 1 9 GE0 Green even data 0 39 BO2 Blue odd data 2 10 GE1 Green even data 1 40 BO3 Blue odd data 3 11 GE2 Green even data 2 41 BO4 Blue odd data 4 12 GE3 Green even data 3 42 BO5 Blue odd data 5 13 GE4 Green even data 4 43 GND -- Ground 14 GE5 Green even data 5 44 PULL (*2) 15 GND -- Ground 45 PULL (*2) 16 BE0 Blue even data 0 46 ENAB Data enable signal 17 BE1 Blue even data 1 47 GND -- Ground 18 BE2 Blue even data 2 48 GND -- Ground 19 BE3 Blue even data 3 49 DCLK Dot clock signal C 20 BE4 Blue even data 4 50 GND -- Ground 21 BE5 Blue even data 5 51 GND -- Ground 22 GND -- Ground 52 SS -- SS function ON/OFF (*1) 23 RO0 Red odd data 0 53 N.C. ---- 24 RO1 Red odd data 1 54 GND -- Ground 25 RO2 Red odd data 2 55 GND -- Ground 26 RO3 Red odd data 3 56 GND -- Ground 27 RO4 Red odd data 4 57 VDD -- +5V Power supply 28 RO5 Red odd data 5 58 VDD -- +5V Power supply 29 GND -- Ground 59 VDD -- +5V Power supply 30 GO0 Green odd data 0 60 VDD -- +5V Power supply (*1) SS (Spread Spectrum):SS function is ON when signal level is high or N.C..(generally set up N.C.) D SS function is OFF when signal level is low. (*2).Connect it to GND for the protection of internal circuit.
DOCUMENT CONTROL SECTION
B
C
D
Upper side Interface connector LCD Module Rear side 31 60 Lower side 30 1 Connector : 52760-0600 (Molex) E
User's connector : 53475-0600 (Molex)
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

13
/
F
1
1
2
3
4
FLC38XGC6V-06
10-2. Color Data Assignment A Table 10-2 shows the color data assignment. Table 10-2. Color Data Assignment
Color Odd Even Black Blue Green Cyan Red Magenta Yellow White Black R Input data
R05 R04 R03 R02 R01 R00 RE5 RE4 RE3 RE2 RE1 RE0
A
G Input data
G05 G04 G03 G02 G01 R00 GE5 GE4 GE3 GE2 GE1 GE0
B Input data
B05 B04 B03 B02 B01 B00 BE5 BE4 BE3 BE2 BE1 BE0
B
0 1
0 0 0 0 1 1 1 1 0 0
0 0 0 0 1 1 1 1 0 0
0 0 0 0 1 1 1 1 0 0
0 0 0 0 1 1 1 1 0 0
0 0 0 0 1 1 1 1 0 0
0 0 0 0 1 1 1 1 0 1
0 0 1 1 0 0 1 1 0 0
0 0 1 1 0 0 1 1 0 0
0 0 1 1 0 0 1 1 0 0
0 0 1 1 0 0 1 1 0 0
0 0 1 1 0 0 1 1 0 0
0 0 1 1 0 0 1 1 0 0
0 1 0 1 0 1 1 0 0 0
0 1 0 1 0 1 1 0 0 0
0 1 0 1 0 1 1 0 0 0
0 1 0 1 0 1 1 0 0 0
0 1 0 1 0 1 1 0 0 0
0 1 0 1 0 1 1 0 0 0
Basic Color
B
Red
Brighter
C
Red Black
61 62 63 0 1
1 1 1 0 0
1 1 1 0 0
1 1 1 0 0
1 1 1 0 0
0 1 1 0 0
1 0 1 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 1
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
C
Green
Brighter Green Black
61 62 63 0 1
D
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
1 1 1 0 0
1 1 1 0 0
1 1 1 0 0
1 1 1 0 0
0 1 1 0 0
1 0 1 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 1
D
DOCUMENT CONTROL SECTION
Blue
Brighter Blue
61 62 63
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
1 1 1
1 1 1
1 1 1
1 1 1
0 1 1
1 0 1
Note.1) Definition of gray scale : Color (n) ---"n" indicates gray scale level. The gray scale is brighter as the number is larger. Note.2) Data; 1: High, 0: Low Note.3) Color data consist of 36 bits, namely, 6-bit odd and even data for each red, green and blue. Optional data can be set to red, green and blue independently. Therefore, the module is able to display 262,144 colors.
E
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

14
/
F
1
1
2
3
4
FLC38XGC6V-06
10-3. Input Signal Timing Table 10-3 and Fig.10-3 shows the input signal timing. Table 10-3. Timing Characteristics Item Period Frequency Duty High time Low time Rise time Fall time Setup time DCLK-Data Hold time Timing Period Horizontal Frequency Display period Period Vertical Frequency Display period Data-ENAB timing
DCLK signal (Clock)
A
A (T=0~50C, Vcc=50.25V) Max. 40.000 40.000 55 -- -- 5.0 5.0 -- -- 1566 60 -- 868 75 -- -- Unit ns MHz ns ns ns ns ns ns DCLK kHz DCLK Th Hz Th DCLK Remark fc=1/Tc *1
Symbol Tc fc Tch/Tc TclkH TclkL Tclkr Tclkf Tset Thold Th fh Thd Tv fv Tvd --
Min. 25.000 25.000 45 5.0 5.0 -- -- 4.5 6.5 565 38.6 -- 772 50 -- --
Typ. 30.764 32.505 50 -- -- -- -- -- -- 672 48 512 806 60 768 0
B
B 40MHz 40MHz fh=1/Th *2,3 16.67ms *2,3 *4
C
Data-ENAB timing
*1) DCLK signal input must be valid while power supply is applied. *2) Display position is specified by the ENAB signal. Horizontal display position is specified by the rise of ENAB signal. The data of a horizontal line, which is latched by the falling edge of 1st DCLK right after the rise of ENAB, is displayed on the left edge of the screen. Vertical display position is specified by the rise of ENAB after a "Low" level period equivalent to eight times of horizontal period. The 1st data corresponding to one horizontal line after the rise of ENAB is displayed at the top line of screen.
C
D
*3) If a period of ENAB "High" is less than 512 DCLK or less than 768 lines, the rest of the screen displays black. *4) The display position does not fit to the screen if the ENAB period and the effective data period do not synchronize with each other.
D
DOCUMENT CONTROL SECTION
E
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

15
/
F
1
1
2
3
4
FLC38XGC6V-06
A DCLK
Tc TclkL Tclkr 0.9V ENAB RO5-5, RE5-0 GO5-0, GE5-0 BO5-0, BE5-0 Tc1 Tclk Tclkf 2.3V 1.65V Tch Tset
A
Thol 2.3V 0.9V B
B
RO5-0, RE5-0 GO5-0, GE5-0 BO5-0, BE5-0 ENAB Th C Th C
RO5-0, RE5-0 GO5-0, GE5-0 BO5-0, BE5-0 ENAB D
C001
C768
Tv Tv Tc D
DOCUMENT CONTROL SECTION
DCLK RO5-0, RE5-0 GO5-0, GE5-0 BO5-0, BE5-0 ENAB
0001 0005 0009 0003 0007 0011 1011 1013 1015 1017 1019 1021 1023
0002
0004
0006
0008
0010
0012
1012
1014
1016
1018
1022 1020 1024
Tdn=0clk
Tdn=0clk
E
Fig.10-3.Input Signal Timing Chart
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

16
/
F
1
1
2
3
4
FLC38XGC6V-06
A
10-4. Correspondence between Data and Display Position Fig.10-3 shows the Correspondence between Data and Display Position.
S0001 S0002 S0003 S0004 S0005 S0006 S0007 S0008
RO 0001 GO 0001 BO 0001 RE 0002 GE 0002 BE 0002 RO 0003 GO 0003
A
S3071 S3072
GE 1024 BE 1024
C001
B
B
C768
RO 0001
GO 0001
BO 0001
RE 0002
GE 0002
BE 0002
RO 0003
GO 0003
GE 1024
BE 1024
C
Fig.10-4.Correspondence Data and Display Position
C
10-5. Power Supply Sequence The sequence of input signals and On/Off of the power supply of this LCD module should be in the specification shown in Fig.10-4 to prevent latch-up of the driver ICs and DC driving of the LCD panel. D Vcc
DOCUMENT CONTROL SECTION
T5<20ms(Voltage descent) ON OFF (0V) H Input signal L T1 T2 10ms4.75V 4.75V 0.5V
D
10%
0.1s0msFig.10-5. Power Supply Sequence
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

17
/
F
1
1
2
3
4
FLC38XGC6V-06
A
11. BACKLIGHT SPECIFICATIONS
11-1. Pin Configuration for Backlight Table 11-1(a) and 11-1(b) shows the description and pin assignment of the connectors (CN-A and B) for the Backlight of this LCD module. Table 11-1(a) Pin Assignment of CN-A
Pin
A
Table11-1(b) Pin Assignment of CN-B
Pin
Signal V L1 V L2 NC GND
Function Power supply for CCFL 1 Power supply for CCFL 2
Signal V L3 V L4 NC GND
Function Power supply for CCFL 3 Power supply for CCFL 4 B
1 B 2 3 4
1 2 3
Ground (for VL1, 2)
4
Ground (for VL3, 4)
Cable color (CN-A and B) : White at GND, Pink at VL1,2,3 and 4 : Housing : BHR-04VS-1 : Contact : SBH-001T-P0.5 User's Connector : Post with base : SM04(4.0)B-BHS-1-TB Supplier : Japan Solderless Terminal Trading Company LTD. (J.S.T.) C 11-2. CCFL Supplier : SANKEN ELECTRIC CO., LTD 11-3. Life The life of the backlight is a minimum of 50,000 hours at the following conditions. D (1) Working conditions Ambient temperature : 255C : (7mA or less) Tube current(IL ) (2) Definition of life Brightness becomes 50% or below 50% of the minimum brightness value shown in Table 9-1. The lamp cannot be lit by the breakdown voltage of 1500Vvms. Lamp is flashing. 11-4. Lamp Assembly set (for replacement) Lamp Assembly set (with charge) is prepared for maintenance. This set consists of an upper lamp assembly and a lower lamp assembly. Type number : FLCL-16S (for upper and lower) Part No. KFN8319F315296Z C Connector
D
DOCUMENT CONTROL SECTION
E
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

18
/
F
1
1
2
3
4
FLC38XGC6V-06
A
SPECIFICATIONS 12. APPEARANCE SPECIFICATIONS
12-1. Zone Inside display dot area (304.1x 228.1mm) Display dot area means active area. One pixel consists of 3 dots (red, green and blue). Foreign particle and scratch unharmful to display image, such as the foreign particle under polarizer film but outside of the display area and scratch on metal bezel, backlight module or polarizer film out of the display area, etc., are not counted. 12-2. Bright spots (1) Bright spots by the defect of TFT. *Visible under bias of 2% ND filter ................................ High bright spot R*G *Visible under 5% but invisible under 2% ND filter ..... Low bright spot R*G*B *Invisible under bias of 5% ND filter ............................. Not counted (2) Bright spots by the light passing through tears, breaks, etc in color filter. *Exceed size of a half dot ................................................. High bright spot *A half dot or less ............................................................. Not counted (3) Bright spots by the light passing through tears, breaks, etc in chromium mask. *Exceed 50m ................................................................... High bright spot *50m or less ................................................................... Not counted
A
B
B
C
12-3. Test condition Inspector must observe the LCD screen from the normal direction under the illumination by a single 20W fluorescent lamp. The distance between the LCD screen and the inspector should be a height of 50cm above the worktable. The vertical illuminance is 300 to 600lux (reference value). Bright spot should be counted under entire black screen. Dark spot should be counted under entire white screen. Frame frequency should be 60Hz. 12-4. Specifications Table 12-4 shows the appearance standard. (Note1) Please do not mistake a single bright spot for a bright spot connection due to Cs(supplemental capacitance) line at the center of each dot. (Note2) If a pixel is dark partially, it connects into the number of dark spots in accordance with following rule. (a) S<1/3 : Not count. Only one of 4 dark connection is allowed. (b) 1/3C
D
D
DOCUMENT CONTROL SECTION
E
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

19
/
F
1
1
2
3
4
FLC38XGC6V-06
Table 12-4. Appearance specifications A No. 1 2 3 4 5 B 6 7 8 9 10 Item Bright spot (high and Low) Bright spot connection (high and low) Total of bright spot Dark spot Dark spot connection Total of dark spot Total of dot defect (bright and dark) high-hgh Distance of bright spot others Distance of dark spot Scratch on polarizer, line shape Judgment method and standard <3 dots <1 pair (2 dot connection in horizontal only) <3 dots <6 dots <3 pairs (2 dot connection in horizontal only) <6 dots < 6 dots >15mm > 5mm > 5mm W<0.03 (Note 1 ) (Note 1)
A
(Note 2) (Note 2) (Note 2) B
C
D
DATE
Ignore L<6 Ignore 0.03C
D
DOCUMENT CONTROL SECTION
E
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

20
/
F
1
1
2
3
4
FLC38XGC6V-06
A
ENVIRONMENTAL 13. ENVIRONMENTAL SPECIFICATIONS
Table 13-1 shows the environmental specifications. Table 13-1. Environmental Specifications Item Temperature Operation Storage Humidity Operation Storage Vibration Non-operation Condition 0~50C -20~60C 20~85%RH 5~85%RH Remark Temperature on surface of LCD panel (display area.)
A
B
B Maximum wet-bulb temperature should not exceed 29C. No condensation.
10~500Hz, 1 cycle/20minute, For single module without 2G, 1.5mm max, 2hour each X, package. Y and Z directions
X, Y and Z directions.
Shock
Non-operation
50G, 6ms, 1time each
C
NOTE: Table 13-2 and Fig. 13-1 show the shock resistance standard when module is packaged. Table 13-2. Shock Resistance Standard when Module is Packaged Dropping location A~J Dropping height 60cm Count 1 time
C
D
G (Top face)
J (Rear face) C (Edge) D
DOCUMENT CONTROL SECTION
F (Side face)
E (Side face)
B (Edge) A (Corner) H (Bottom face) E
I (Front face) D (Edge)
Fig.13-1. Direction to apply shock to package
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. DESCRIPTION APPR. DESIG. CHECK CUST.

21
/
F
1
1
2
3
4
FLC38XGC6V-06 14. INDICATIONS
This module has the following indications. A (1) Product name (2) Model number : LCD unit : FLC38XGC6V-06 A
(3) Product drawing number : NA19020-C281 or NA19020-C291 (4) Manufacturing number : 8 Y 0 0 0 0 1 Serial number (To be reset every month on 1st.) B Manufacturing month (Oct. = X, Nov. =Y, Dec. =Z) Last digit of manufacturing year. (5) Version number : 01A (Example) -1st 2 digits "01" means operational version. -3rd alphabet means functional version. : MADE IN JAPAN (NA19020-C281) MADE IN TAIWAN(NA19020-C291) C (7) Company name : FUJITSU LIMITED C
B
(6) Country of origin
(8) Disposal method of cold-cathode tubes. (See Fig.14-1) (9) Caution when changing cold-cathode tubes. (See Fig. 14-2)
THIS TFT COLOR LCD CONTAINS COLD CATHODE FLUORESCENT LAMPS. PLEASE FOLLOW LOCAL ORDINANCES OR REGULATIONS FOR ITS DISPOSAL. WHEN CHANGING COLD CATHODE FLUORESCENT LAMPS, FOLLOW OPERATING SPECIFICATIONS. ESPECIALLY BE CAREFUL BOUT THE LAMPS SIDE-EDGE.
LCD unit
D
FLC38XGC6V-06 0X50015 NA19020-C281 01A MADE IN JAPAN/FUJITSU LIMITED
D
Fig.14-1
DOCUMENT CONTROL SECTION
Fig.14-2
Fig.14-3 Product label (example)
15. PACKAGING
Separately specified in packaging specifications. 15-1. Packaging specifications (1) 5 LCD modules / 1 package. (2) Weight: approximately 10kg / 1 package. (3) Outline dimensions : 353mm (W)x268mm (D) x462mm (H) 15-2. Packaging method Fig.15-2 (a),(b),(c),(d) show the packing method. E
DATE
FLC38XGC6V-06
03 20010109 EDIT DATE DESIG. CHECK APPR. CHECK DESIG. Correct 15-1(3) DESCRIPTION APPR.
Tech Bes LCD-00050
CUST.

22
/
F
1
1
2
3
4
FLC38XGC6V-06
A
Protective sheet
A
Front side
B
B
Tape
Rear side
C
C
D D
DOCUMENT CONTROL SECTION
Anti-Electric Bag Front side
E
Fig.15-2(a) Packaging Method
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. CHECK DESCRIPTION APPR. DESIG. CUST.

23
/
F
1
1
2
3
4
FLC38XGC6V-06
A
Holder(bottom)
LCD unit
A
B
B
Holder(upper)
C
C
(353) D Label(example)
(TYPE) FLC38XGC6V-06 NA19020-C281 (DRWG. NO.) 9X00001 9X00002 9X00003 9X00004 9X00005 (QTY.) (REV. NO.) 5 01A
(268)
(462)
D * Taping Upper : H or I method Bottom : H method * Upper and bottom holders should be anti-electrostatic type.
DOCUMENT CONTROL SECTION
MADE IN JAPAN
E
Fig.15-2(b) Packaging Method
DATE
FLC38XGC6V-06
03 20010109 EDIT DATE DESIG. CHECK APPR. CHECK DESIG. Correct package size DESCRIPTION APPR.
Tech Bes LCD-00050
CUST.

24
/
F
1
1
2
3
4
FLC38XGC6V-06
Upper Board A A
Corrugated Carton
B PP Belt
B
1980(By Ship) 1520(By Airplane)
C
Carton Angle
C
D (900) (900) D
DOCUMENT CONTROL SECTION
Wrap Film Up and Down : 3 times wrap Middle : 2 times wrap Note:1) 8 boxesx4 layers (maximum 32 boxes) : by ship 8 boxesx3 layers (maximum 24 boxes) : by airplane Note:2) This drawing shows marine transportation specification. Fig.15-2(c) Packaging Method
E
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. CHECK DESCRIPTION APPR. DESIG. CUST.

25
/
F
1
1
2
3
4
FLC38XGC6V-06
Corrugated carton(A) With LCD modules A Cushioning material
A
B 617 (585) Corrugated fiberboard shipping container(B)
B
496 (480)
616 (600)
C
C
Note 1) The carton (A) should be placed in the middle of the container(B) with enough cushioning materials. Note 2) The figures in ( ) show inside measurements of the container(B).
D
Figure.15-2(d) Packaging Method D
DOCUMENT CONTROL SECTION
E
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. CHECK DESCRIPTION APPR. DESIG. CUST.

26
/
F
1
1
2
3
4
FLC38XGC6V-06 16. WARRANTY
The warranty period is one year after manufacturing. Products which fail during this period are repaired or replaced without charge, unless the failure is caused by user. A A
17. PRECAUTIONS
Adhere to the following precautions to properly use this LCD module.
(1) Fail safe design
LCD module has an inherent chance of failure. Customers must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. B (2) Handling of LCD panel Do not apply any strong mechanical shock to the LCD panel. Since the LCD panel is made of glass, excessive shock may damage the panel or cause a malfunction. Do not press hard on the LCD panel surface. In the LCD panel, the gap between two glass plates is kept precisely and uniformly to maintain display's characteristics and reliability. If this panel is pressed hard, the following troubles occurs. (a) Ununiformity of color (b) Orientation of liquid crystal becomes disordered Problem (a) returns to normal after a while. Problem (b) returns to normal if power is shut off once then turned on again. However these operations should be avoided to insure reliability. polarizer Do not scratch the polarizer film on the LCD panel surface. *Do not press or rub the display surface with a hard tool, pincet, etc. *For handling, use cotton or conductive gloves so that the display surface is not stained. *For If the display surface is stained by dust or dirt, clean it as follows with a soft cloth (deer skin, etc.) D [Dust] Wipe off with a soft cloth. (do not rub.) [Dirt ] Wipe off lightly with a soft cloth after soaking in the clear water and squeezing hard out of water drops. Only if the dirt is hardly wiped off, use isopropyl alcohol or ethanol. Be careful not to splash the water or the solvent and water penetrated between the polarizer and the LCD panel. Do not use solvents such as ketone (acetone, etc.) and aromatics (xylene, toluene, etc.) *If saliva or water drops are left for long time, it may deform partial deformation or discolored. Wipe off immediately in the same way as for dirt. *Do not allow oil to adhere to the module, since the cleaning of oil is difficult. of Do not place or contact objects on the display surface for a long period of time. That's because this may make some parts of the LCD module distorted and the display quality may decline. B
C
C
D
DOCUMENT CONTROL SECTION
E
DATE
FLC38XGC6V-06
04 20010706 EDIT DATE DESIG. CHECK APPR. CHECK DESIG. Add 17.(1) DESCRIPTION APPR.
Tech Bes LCD-00050
CUST.

27
/
F
1
1 (3) Handling of LCD module
2
3
4
FLC38XGC6V-06
A
coldDo not pull the cold-cathode tube cable strongly. If the cable is pulled with the loaf of 2kg or more, the cable may be damaged or reliability may decrease. user' Assemble the module into user 's system in a dust free environment. If conductive foreign matter adheres to the module, failures may occur. antiTake anti-static measures for assembling the module. Since the LCD module contains CMOS-ICs, the following considerations are necessary. * For assembling the module, operator should be grounded and wear cotton or conductive gloves.
A
B
* Floor of work area and work table to assemble the LCD module should be covered with electrostatic shielding in order to discharge static electricity via an earth wire. * If necessary, ground operation tools (soldering iron, radio pliers, pincet, etc.). * Do not take the module out of the conductive bag until the time when the module is assembled. * Assemble the module under low humidity (50%RH or less). Do not pull the connecting cable on the rear face of the LCD module strongly. Do not disassemble or remodel the LCD module. If this LCD module is disassembled or remodeled, it may have some trouble, or the display quality and reliability may not be assured.
B
C
(4) Precautions for operating the LCD module Adhere to the specified power supply sequence. If not followed, the CMOS-IC may cause a latch-up, or the DC voltage may be applied the liquid crystal, and a failure or serious deterioration in display quality may occur. Do not operate the LCD module when condensation is present. If the LCD module is operated when condensation is on the terminals of the LCD panel, the terminals cause electrochemical reaction, and may reach disconnection. Condensation easily occurs especially when the module is moved from a cold environment to a warm environment.
C
D
Trouble that occurs when the LCD module is used at not recommended temperature. * Operation at high temperature(>50C) :Display colors shift to blue. * Storage at high temperature (>60C) :The polarizer film deteriorates and contras decreases. D
DOCUMENT CONTROL SECTION
* Operation at low temperature (<0C) :The response speed decreases considerably. * Storage at low temperature (<-20C) :The liquid crystal may solidify and become damaged. Always input the control signals at the correct timing. If control signals (DCLK, or ENAB) are not input, or if the timing is out of the specified timing, DC voltage may be applied to the liquid crystal and, as a result, cause image sticking or deterioration of contrast.
E
DATE
FLC38XGC6V-06
Tech Bes LCD-00050
EDIT DATE DESIG. CHECK APPR. CHECK DESCRIPTION APPR. DESIG. CUST.

28
/
F
1
1
2
3
4
FLC38XGC6V-06
(5) Precautions on designing module mounting Do not press the display surface and bottom face of the LCD module. Display quality or reliability may be deteriorated if the installation of the LCD module is inappropriate and, as a result, excessive pressure is applied to the surface of LCD screen. Brightness uniformity or the reliability of CCFL may decrease if the pressure is applied to the backlight module. Consider Consider the module mounting design, so that twisting and bending do not occur to the LCD module. Excessive twisting and bending may damage display quality and reliability. The power cable length between the LCD module and inverter should not be extended. Otherwise the backlight may not light or flickering may occur. B power Do not make the power cable of the backlight clung to a metal plate, etc. Backlight frequency current for backlight driving may leak to the metal and desired brightness may not be assured. When Mounting LCD module with M4 screw (x4) should be screw up under 5.75kgf torque. (6) Storage method Do not store the LCD module in an atmosphere of organic solvent or corrosive gas. In an organic solvent atmosphere, the polarizer film discolors and display quality deteriorates. In a corrosive gas environment, various problems may occur. C Store the LCD module in a Fujitsu package. At storing, Fujitsu packages can be stacked up to 4 boxes. The LCD module is in an anti-static bag. Keep the module in that status. controlled, It is recommended that the storage environment should be humidity controlled, cool and dark. Recommended storage environment *Place :Dark (avoid direct sunlight) *Temperature : 10~35C *Humidity : 50~60%RH D Note) If the module is left in an environment of 60 optical characteristics may deteriorate.
(7) Others
A
A
B
C
or more for a long period of time,
D
!
DOCUMENT CONTROL SECTION
If the LCD panel is damaged, do not inhale or allow the liquid crystal to enter the mouth If the liquid crystal contacts the body or cloths, wash it off with soap immediately. Follow precautions for regular electronic components. flux Solder flux on the printed circuit board is harmless to the quality and reliability of LCD module. Fujitsu is practicing non-wash technology on module assembly process. E
DATE
FLC38XGC6V-06
04 20010706 EDIT DATE DESIG. CHECK APPR. CHECK DESIG. Revised 17(7) DESCRIPTION APPR.
Tech Bes LCD-00050
CUST.

29
/
F
1
1
2
3
4
FLC38XGC6V-06
18. PRECAUTIONS FOR USE
This Product is designed, developed and manufactured as contemplated for general use, including without limitation, general office use, personal use, household use, and ordinary industrial use, but is not designed, developed and manufactured as contemplated for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could lead directly to death, personal injury, severe physical damage or other loss (hereinafter "High Safety Required Use"), including without limitation, nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system. If customer's product possibly falls under the category of High Safety Required Use, please consult with our sales representatives in charge before such use. In addition, Fujitsu shall not be liable against the Customer and/or any third party for any claims or damages arising in connection with the High Safety Required Use of the Product without permission. A
A
B
B
19. Miscellaneous
Specifications of the TFT-LCD panel and other components used in the LCD module are subject to change. Both parties shall discuss together before change. If any doubt is raised in the content of the specifications, both parties shall discuss and make best effort for the agreement.
C
C
D D
DOCUMENT CONTROL SECTION
E
DATE
FLC38XGC6V-06
04 20010706 EDIT DATE DESIG. CHECK APPR. CHECK DESIG. Add 18, 19 DESCRIPTION APPR.
Tech Bes LCD-00050
CUST.

30
/
F
1

▲Up To Search▲

Price & Availability of FLC38XGC6V-06

	To Download FLC38XGC6V-06 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .